PRODUCT CATEGORIES
Grouting Mixing Plant
Grouting Pump
Grouting Mixer and Agitator
Refractory Gunite/Shotcrete/Mixer
Shotcrete Machine
Peristaltic Pump
Foam Concrete Machine
Soil Spraying Machine
Anchor Equipment and Tools
Concrete Pump
Plaster Pump
Slurry Pump
Hydraulic Pump Station
Road Marking Machine
Filter Press
Drilling Rig
Customized Service

preparation for start-up shotcrete machine

2015-10-30 10:03:12

(1)Check whether the installation of anchor rod meets the design requirements, and handle in time when problems are found.

(2)Clean up waste rock debris at the injection site. Install gunite machine on the place where the stability of surrounding rock is safe and it cannot be less than 0.5 m from slide clearance. Wind pipeline, water pipeline and transporting pipeline should be straight and no sharp turn, and the joint is tight an no air leakage. It is strictly prohibited to use the antistatic plastic pipe as transporting pipe.

(3) Check whether the shotcrete machine is in good condition, and conduct the no-load test run. Fasten the friction plate to avoid the phenomenon of air leakage.

(4) Prior to spraying, flushing the rock-face with high pressure water, and set the marks in the tunnel vault to indicate it should be spraying thickness.

(5) Spraying personnel should wear complete and effective labor insurance supplies.

Gaode Equipment Co., Ltd, short name Gaodetec, is a manufacturer specialized in R&D, manufacture and sale of concrete spraying machine. We have now developed full series of dry-mix shotcrete machine and wet-mix shotcrete machine, output from 1.5m3/h to 9m3/h,electric motor,diesel engine,air motor and gasoline are available options for customization.

If you are interested in our products, please keep free to contact with us.

Email:info@gaodetec.com


    

 
COPYRIGHT © GAODE EQUIPMENT CO.,LTD. Site Index Product IndexPrivacy Policy Technical Support:coverweb