Quotation
PRODUCT CATEGORIES
Hydroseeding Equipment
Grouting Mixing Plant
Grouting Mixer and Agitator
Grouting Pump
Refractory Gunite/Shotcrete/Mixer
Shotcrete Machine
Peristaltic Pump
Anchor Equipment and Tools
Foam Concrete Machine
Filter Press
Slurry Pump
Drilling Rig
Plaster Pump
Road Marking Machine
Concrete Pump
Hydraulic Pump Station
DTH Drill Tools
Customized Service
Send Inquiry

Portable hydroseeder for sale

2018-11-20 10:43:22

The surface soil is similar or superior to the porous stable soil structure.
The portable hydroseeder machine is a granulating structure formed by the granules, and the reinforced fiber plays a network reinforcement function similar to the plant roots, so that it has a certain thickness and is resistant to rain and wind, and is firm and breathable, and natural.

Portable hydroseeder


Technical points

1. Grass species selection. The grass species to be sprayed should be perennial varieties with developed roots, fast growing, drought-resistant and barren-resistant; if the local winter is cold, the frost resistance of the portable hydroseeder varieties should also be considered.

2. Hanging the net. First fix the anchor nails on the stone wall at a certain distance, and then hang the net.

3. Mixed broadcast. The use of grass species complementarity, such as deep roots and shallow roots, legumes and grasses, field and local, early development and late development, mixed spray.

4. The amount of water retention agent and adhesive. The water retaining agent can be adjusted according to the climatic conditions of each place and the characteristics of the stone field; the binder can be portable hydroseeder determined according to the slope of the stone wall, and is proportional to the slope.

5. Spraying the substrate is an important factor to ensure the success of the spray. Peat soil is a good material for spraying. It can be mixed with wood fiber (or pulp) in a certain ratio. It has better adhesion and water retention than pure wood fiber alone. It can be thinner and very thin in the soil layer.
Even the surface of the weathered rock is sprayed, and the general thickness of the spray is 10-20 cm.

Portable hydroseeder for sale


The guest soil spray is to mix the high-quality loam with the matrix material and the rubber chain material containing the nutrients portable hydroseeder needed for plant growth, and then fully stir the air, and then compress the air through the air compressor to spray on the rock slope surface by the spray gun.
The base slope creates a small environment suitable for plant growth, planting plant communities that can be managed extensively, maximizing soil and water conservation, and restoring natural ecology.

Application range

The land-spraying is often carried out in an environment with poor site conditions and relatively complex geological structures. Portable hydroseeder is widely used in ecological protection projects for slope greening such as roads (railways), mines, riverbank slopes, and quarries.

Conventional material

1. Soil: high quality tillage soil

2. Matrix material: grass or peat soil, grass fiber or wood fiber, fertilizer, water retention agent, binder, humus, etc.

3. Equipment: Forming spray machine or homemade equipment.

4. Seeds: plants, shrubs and flower species.

5. Others: lead wire mesh, anchor or grid mesh, geocell, non-woven fabric, etc.

hydroseeder


The choice and ratio of matrix materials are directly related to the soil and water conservation of the slope and the stability of the sprayed materials and plant growth. Therefore, it is necessary to arrange the matrix reasonably according to the portable hydroseeder slope conditions and according to the site conditions.

Inquiry >>
Products you need :
Your name :
Your tel :
* Your mail :
Your company :
Your country :
* Inquiry :
 
COPYRIGHT © GAODE EQUIPMENT CO.,LTD. Site Index Product IndexPrivacy Policy Technical Support:coverweb