Lawn seed hydroseeding machine for Malaysia
2021-04-22 17:48:47
Lawn seed hydroseeding machine for Malaysia
Lawn seed hydroseeding machine for Malaysia is particularly suitable for stone slopes, which greatly improves the planting efficiency and success rate. The core pump of the lawn seed hydroseeding machine adopts a pressurized multi-stage pump. The purpose of the hydroseeding machine for Malaysia project is: to prevent soil erosion, the ancient way of artificial planting does not waste a lot of time and manpower, and the planting effect can not reach the considerable effect and facilitate construction. It has better adhesion and water retention performance than pure wood fiber alone.
Lawn seed hydroseeding machine for Malaysia can be used for stable soil slopes, high fill subgrade slopes, artificial soil slopes, lawns, rice fields, gardens, golf courses, parks, schools, soil amendments and erosion control sites.
The characteristics of the hydroseeding machine for Malaysia:
1. Beautiful appearance and compact structure.
2. It has good overall mobility and complete accessories.
3. Equipped with electric start diesel engine, easy to operate.
4. Good working performance and high efficiency.
5. Many types are available for you to choose from.
In order to increase the chances of seed germination, we recommend using a biodegradable protective blanket to protect the slope after hydraulic sowing. The biodegradable protective blanket adheres directly to the surface of the soil to prevent seeds from being washed away by rain or being eaten by birds or slowed down.
On the second day of our water conservancy planting, watering can be carried out to ensure rapid germination and growth. We must perform proper watering to ensure that the water penetrates into the soil and at the same time prevent water from spilling onto the soil surface.
1. The sprayer operator must carefully read this manual and the accompanying diesel engine manual, and strictly abide by the technical operation and maintenance procedures specified in the manual.
2. Before starting the engine, it should be in a no-load state. Put the power clutch in the "off" position and the stirring reversing control lever in the "stop" position. After starting, the throttle should be increased slowly, and the throttle should not be increased or decreased suddenly. After the engine is started, the stirring and jet pumps are put into work respectively.
3. The soil used for spraying should be sieved and added to the box to make the particle size less than 10mm to avoid clogging the nozzle during construction.
4. When the ambient temperature in winter is lower than 5 degrees, the cooling water in the engine water tank must be drained.
5. When the machine is running, it is strictly forbidden to touch the rotating parts such as the running gear and belt.
Email：info@gaodetec.com .jpg)
.jpg)
.jpg)