Hydroseeding Equipment
Grouting Mixing Plant
Grouting Mixer and Agitator
Grouting Pump
Refractory Gunite/Shotcrete/Mixer
Shotcrete Machine
Peristaltic Pump
Anchor Equipment and Tools
Foam Concrete Machine
Filter Press
Slurry Pump
Drilling Rig
Plaster Pump
Road Marking Machine
Concrete Pump
Hydraulic Pump Station
DTH Drill Tools
Customized Service
Send Inquiry

Maintenance of Gaodetec grout pump

2017-10-11 17:51:51

Gaodetec grout pump is widely used in the grouting process grouting equipment, strong grouting pressure, good mechanical stability to win the appreciation of the majority of users, however, because the two-liquid injection pump are in the hardships on the site Over, maintenance and maintenance is an indispensable process. Grouting pump for mine, tunnel, water conservancy, subway, construction, bridges and other construction sites of grouting water, fill the gap, strengthen the broken rock and other projects. Then tell us about the maintenance and maintenance of the grouting pump need to pay attention to the problem:
1. Grout pump repair Each time you start the equipment, you must check the hydraulic tank in the tank is normal, the trip switch is tight, or should be promptly handled.
2. In the operation of the equipment, the operator should always check the pressure of the hydraulic system is stable, the oil temperature is too long, too high, air air leakage phenomenon, hair should be promptly troubleshooting. In order to avoid malfunction of the equipment, damage to the main pump and hydraulic components, the equipment will not work properly.
3. Grouting, injection tank and material pipe should be promptly cleaned, and should be coated with anti-rust in the material pipe wall. If the machine is not used for a long time, the entire equipment should be fully routine maintenance, keep the equipment well, put down the hydraulic oil.
4. Hydraulic oil in the equipment every 12-18 months to replace once, to facilitate the stability of the system work.
5. The grout pump in the normal use of the process, every three months should be fastened fasteners and fittings once.
6. The monthly clear filter, air filter once, to avoid pump inhalation of impurities damage the oil pump and hydraulic piping.
Above is the Gaode Equipment Co.,Ltd. to introduce the maintenance and maintenance of the injection pump, if you use the process in the grouting pump what is the problem, please email us! Email address: info@gaodetec.com.
Gaodetec produced by the company's grout pump with small energy consumption, small vibration, low noise, small size, high efficiency, stable and reliable performance, pressure and flow control easy, long life and other advantages. The maximum pressure of the pump can be set; to avoid unnecessary loss in the grouting process; grouting is the slurry into the rock or soil cracks and fill the compaction, grouting process will punch out a new crack , Thus forming a frequent change in grouting pressure, and sometimes the grouting pressure will drastically change dramatically.

Maintenance of grout pump



Inquiry >>
Products you need :
Your name :
Your tel :
* Your mail :
Your company :
Your country :
* Inquiry :
COPYRIGHT © GAODE EQUIPMENT CO.,LTD. Site Index Product IndexPrivacy Policy Technical Support:coverweb